A letter plate is one of the few pieces of door hardware that has a job to do every single day, and one of the easiest to get wrong. Order the wrong size and you’re either cutting a bigger hole in the door or living with a plate that doesn’t cover the one you’ve got.
Measure the aperture first
If there’s an existing letter plate, measure the hole in the door, not the plate covering it. You need:
- Aperture width and height, the actual cut-out in the door
- Overall plate dimensions, which need to cover the aperture with a comfortable margin
- Fixing centres, the distance between the bolt holes
If you’re cutting a new aperture, work from the plate specification rather than the other way around.
Door thickness matters
Letter plates fix through the door with bolts, and those bolts have to suit the thickness. Older doors are frequently thicker than modern ones. Measure at the position where the plate will sit, not at the edge, since panelled doors vary across their width.
Horizontal or vertical?
Horizontal is the usual arrangement, positioned in the middle rail of a panelled door. Vertical letter plates sit in the lock stile and suit doors where there’s no suitable horizontal rail, including many modern doors and some glazed ones.
The right answer is usually dictated by the door construction rather than preference.
Sprung flaps, draughts and tidiness
A good letter plate closes firmly rather than hanging half open. If draughts are a concern, an internal flap or a separate draught excluder behind the plate does more than the outer flap itself.
On a front door that takes a lot of post, look at the flap’s clearance. A plate that’s technically wide enough but has a stiff spring will annoy whoever delivers to it.
Matching the rest of the door
A letter plate should match the knocker, numerals and any pull or centre knob, in both material and finish. Mixed finishes are the single most common thing people end up replacing. Our guide to door knockers, letter plates and numerals covers the full set, and our door hardware buying guide explains what you actually need on a front door.
If you’re working on a period property, our guide to choosing door furniture for period properties is worth reading first.
Solid brass lasts
A letter plate is handled, knocked and weathered constantly. Solid brass takes that and improves with it. Plated finishes wear through at the flap edge, which is exactly where the eye goes. See solid brass vs brass-plated.
Fitting
- Mark the centre line and position carefully, using the plate as a template
- Drill the fixing holes square to the face of the door
- Cut the aperture cleanly, working from both sides to avoid breakout
- Fit the plate with the bolts sized to the door thickness
- Fit the internal flap or cover plate
Take the extra minute to check the plate is level against the door rail rather than against the floor. On an old house they aren’t the same thing.
Browse the range
See our letter plates, door knockers and the rest of our door hardware.
Frequently asked questions
Measure the aperture in your door and choose a plate that covers it with a margin all round. Check the fixing centres and the door thickness too.
Usually, with the right aperture size and bolt length. Check the existing aperture before ordering, as these doors often use a standard size.
Yes, in material and finish. It’s the pairing people notice most on a front door.
